Engenius ECB600

Engenius ECB600

With the dual band Wireless N600 ECB600 companies can now offer employees, guests, staff or students more expanded options for users who transfer large files within the network or use other bandwidth intensive applications like streaming HD video. The AP’s Gigabit Ethernet (10/100/1000) port also offers greater bandwidth capacity and faster data transfers through the network. This high-powered Access Point/Bridge with its enhanced receive sensitivity and internal MIMO (Multiple In/Multiple Out) antenna array extends wireless coverage and enhances connectivity to client devices even in areas where connections have been previously challenging or non-existent and in some buildings it’s wireless signal can penetrate up to 3 floors. This makes the ECB600 ideal for extending networks within large or multi-story buildings or expansive, client-intensive facilities like hotels, resorts, hospitals, office buildings, universities or other multi-building campus facilities.

The ECB600 can be configured to operate in several different modes – as a dual band Wireless-N Access Point, a WDS Access Point, or Repeater. It operates concurrently in the 2.4GHz and 5GHz frequency spectrums supporting 802.11a/b/g/n standards. ECB600 also includes EZ Controller, access point monitoring and management software that provides a robust suite of tools for IT managers, installers and network administrators to monitor the performance of their deployed EnGenius access points and bridges, update them with new firmware or reconfigure the operation mode that they are in from one central location

Features

Dual Band for Expanded User Capacity

802.11n dual radio operation in 2.4 GHz and 5 GHz with up to 300 Mbps throughput speed on both the 2.4 and 5 GHz frequency bands.

High Power, Long-Range Coverage

29 dBm for 2.4 GHz, 26 dBm for 5 GHz RF transmit power provides more than twice greater wireless coverage over other competitors.

SSID-to-VLAN Tagging

Can be configured to broadcast up to eight (8) SSIDs (4 SSIDs per frequency band). Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.

802.3at/af PoE Compatible

Supports Power over Ethernet (IEEE 802.3at/af) and allows deployment in areas where power outlets are not available

High-Gain External / Detachable Antennas

Four 5 dBi external omni-directional antennas optimizing maximum RF performance

Simplified AP Monitoring and Management

SNMP-based wireless access point monitoring and management software - EZ Controller™ (available as a free download)

Spec.

Technical Specification
Hardware RF: 2.4 and 5 GHz Frequency Bands Standard: IEEE 802.11a/b/g/n Radio I: 11b/g/n: 2.412~2.484 GHz Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz Data Rate: Up to 300 Mbps in both frequency bands Memory: 64MB Flash Memory: 8MB Antenna Four (4) External 5 dBi Omni-Directional Antennas Physical Interface 1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) 1 x Reset Button Power Jack Power Requirements Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz (depends on different countries) Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af) Power Adapter (United States) 48VDC/0.375A Device: 12V/2A Modulations OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK Operating Channels 2.4 GHz: US/Canada 1-11 5 GHz: Country dependent for the following ranges: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Receiver Sensitivity
802.11n (5 GHz) -94dBm @ MCS0 -76dBm @ MCS7 -91dBm @ MCS8 -73dBm @ MCS15 802.11n (2.4 GHz) -95dBm @ MCS0 -77dBm @ MCS7 -91dBm @ MCS8 -75dBm @ MCS15	802.11a (5 GHz) -95dBm @ 6Mbps -80dBm @ 54Mbps 802.11b (2.4 GHz) -95dBm @ 1Mbps -91dBm @ 11Mbps
Available Transmit Power (Max. Power may be different depending on local regulations)
802.11n (5 GHz)                           802.11n (2.4 GHz) 27dBm @ MCS0~2/MCS8~10              27dBm @ MCS0~2/MCS8~10 26dBm @ MCS3/MCS11                    27dBm @ MCS3/MCS11 25dBm @ MCS4/MCS12                    26dBm @ MCS4/MCS12 23dBm @ MCS5/MCS13                    25dBm @ MCS5/MCS13 22dBm @ MCS6/MCS14                    24dBm @ MCS6/MCS14 21dBm @ MCS7/MCS15                    23dBm @ MCS7/MCS15 802.11a (5 GHz)                           802.11b (2.4 GHz) 26dBm @ 6~24Mbps                       7dBm @ 1~11Mbps 25dBm @ 36Mbps 23dBm @ 48Mbps 21dBm @ 54Mbps

Software

Topology    Infrastructure/Ad-Hoc Operation Modes    Access Point, WDS Bridge, WDS Access Point, Universal Repeater Multiple BSSID    Supports up to 8 BSSIDs per radio LAN    IP (check validity and DHCP server IP range) MAC SSID-to-VLAN Tagging    Supports 802.1q SSID-to-VLAN tagging Spanning Tree    Supports 802.1d Spanning Tree Protocol Wireless Wireless Mode: 11a/11b/11g/11n Channel selection (settings vary by country) Channel bandwidth (Auto, 20 MHz, 40 MHz) Transmission rate: 2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only 5 GHz: 11n only, 11a/n mix, 11a only QoS    WMM  (Wireless Multimedia) VPN    Pass-through (PPTP, L2TP, IPSec) WPS    Software only

Management

Tx Power Control   Adjust transmit power by dBm Configuration   Web-based configuration (http)/Telnet Telnet Server   CLI Firmware Upgrade   Via web browser, settings are reserved after upgrade Administrator Setting   Administrator Username and Password Change Reset Setting Reboot (press 1 second). Reset to factory default (press 10 seconds) System Monitoring   Status Statistic and Event Log SNMP   V1, V2c, V3 MIB   MIB I, MIB II (RFC1213) and private MIB Traffic Shaping   Incoming and outgoing wireless traffic shaping Auto-channel Selection   Automatically selecting least congested channel Bandwidth Measurement   IP range and bandwidth management Auto Reboot   Reboot Access Point by minute, hour, day, or week Backup and Restore   Save and restore settings through Web interface CLI   Supports Command Line Interface Diagnosis   IP pinging statistics Log   SysLog and Local Log support LED Control   On/Off AP Detection   Scanning for available EnGenius APs Wireless Security WPA/WPA2 Personal (WPA-PSK using TKIP or AES) WPA/WPA2 Enterprise (WPA-EAP using TKIP) 802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP SSID broadcast enable/disable MAC Address Filtering, Up to 50 field L2 Isolation (Access Point mode) Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) 802_11abgn, 802_3at, Dual Band, Fast Handover, Gigabit, enegnius ecb600, access point, wireless solution, wifi access point, wifi AP, wireless AP, ECB600,engenius Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com

Engenius ECB350

Engenius ECB350

ECB350 is a 300Mbps wireless-n multi-function gigabit AP which offers unlimited coverage, strong penetration, secure network management and 802.3af PoE connection.

Gigabit Ethernet ensure the high speed of Ethernet. External 5dBi antenna provides extended and stable wireless connection. Maxima 29dBm high power transmission offers at least 3 floors penetration in your environment. MSSID + VLAN make your data more secure and easy management. Standard PoE interoperable with 802.3af makes internet connection more flexible.

EAP350 designed with 8 operation modes, users can set different mode in different environments. It is a high-end  model suitable for the usages of SOHO, Small offices, restaurants and …etc.

Features

System Requirement
System	Windows Windows7, 98, ME, NT, XP, 2000. Mac OS X (10.4)
Access method	Web Based (HTTP 1.0 / 1.1)
Browser Compatibility	Microsoft IE 6.0 or above, Firefox 2.0 or above

Status
System Status	System Information	System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
	Current IP Setting	IP Address, Subnet Mask, Default Gateway, DHCP, DNS.
	Current Wireless Setting	Operation mode, Wireless Mode, Channel/ Frequency, L2 Isolation, MSSID Setting
Client List	List current associated clients. Show only authorized and associated clients
System Log	Displays a list of events triggered

Wireless Functional List
Operation mode			AP
			Router
			Client Router
			Client Bridge
			WDS AP
			WDS Bridge
			WDS Station
			Universal Repeater
WDS detail			WDS Station algorithm
			WDS AP algorithm
			WDS bridge algorithm
802.11 mode options			b/g/n
Channel setting			Manual
			Auto / Best Channel Selection
Transfer rate setting			Auto and Manual
Output Power Control			Select by dBm
Multiple BSSID (Multi AP)			4 BSSID for 2.4Ghz
			Each BSSID should has its own WiFi & security settings
Security		WEP	WEP(64/128bit)
		WPA/ WPA2	TKIP / AES
		MAC address filtering	MAC address filtering (WLAN, up to 32 field)
		802.1x Authenticator	MD5/ TLS/ TTLS, PEAP (Nice to Have)
		802.1x Supplicant	Only CB/CR modes
LAN Settings			IP (check validity and DHCP server IP range)
DHCP server			DHCP Range, Lease Time, Client list
VLAN	MSSID		VLAN tag on MSSID
	Management VLAN Ethernet Port VID		Only allow user with specified VID to access the device
	Tag/ Untag Option		Independent VLAN setting can be enable or disable
	Add VLAN tag		Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
SNMP	SNMP V1/V2C		- SNMP Active : Disabled / Enabled - Read Community - Set Community - System Location   - System Contract - Trap Manager IP
	MIBI, MIBII
	Private MIB
Administration			User Name
			Password
			Confirmed Password
Backup/ Restore Setting			Save Current Setting Restore Saved Setting Reset to Factory Default
Firmware Upgrade			Firmware Upgrade Allow User to decide to Keep current setting.
Diagnosis			Address to Ping

Spec.

Hardware Specifications
Memory	32MB
Flash	8MB
Physical Interface	LAN: 1 x 10/100/1000 Fast Ethernet RJ-45 (802.3af PoE standard supported)
	Reset button
	Power Jack
LED Definition	Power x1	Green	Booting: Blink at 1HBooting System Ready: On Firmware Upgrade: Blink at 4Hz System Off: Power Off
	WLAN x1	Green	Link: Solid Light / Active: Blinking (Receiving/ Transmitting data)
	LAN x1	Green	Link: Solid Light / Active: Blinking (Receiving/ Transmitting data)
Adapter	12V / 1A

Wireless Specifications
Frequency Band	2.400～2.484 GHz(11b, 11g, 11n)
Modulation Technology	OFDM: BPSK, QPSK, 16-QAM, 64-QAM DBPSK, DQPSK, CCK
Operating Channels	11 for North America, 14 for Japan, 13 for Europe
Wireless Setting	Operation Mode – AP / Router/WDS AP/WDS Bridge/WDS Station/Client Bridge/Client Router/ Universal Repeater. Wireless Mode – 11b/ 11g /11n Channel Selection (Setting varies by Country) Channel Bandwidth (Auto, 20Mhz, 40Mhz) Transmission Rate - 11n only ,11b/g/n mix ,11b only ,11b/g mix.
Receive Sensitivity (Typical)	2.412 ~ 2.472 GHz (11b) best ≦ -90 dBm 2.412 ~ 2.472 GHz (11g) best ≦ -88 dBm 2.412 ~ 2.472 GHz (11n) best ≦ -85 dBm
Available transmit power (The Max. Power will be different depending on local regulations)	11b	1Mbps - 11Mbps	29
	11g	6Mbps - 9Mbps	29
		12Mbps - 18Mbps	28
		24Mbps - 36Mbps	24
		48Mbps - 54Mbps	23
	11n	MCS 0-1 / 8-9	26
		MCS 2-3 / 10-11	25
		MCS 4-5 / 12-13	24
		MCS 6-7 / 14-15	23
Antenna	External 5dBi SMA antenna

Environment & Mechanical & Certification
Temperature Range	0 to 50° C - Operating,  -20 to 60 ° C - Storage
Humidity (non-condensing)	90% or less – Operating, 90% or less - Storage
Certification Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com	FCC/CE/IC

EnGenius ECB300

EnGenius ECB300

EnGenius ECB300 Access Point and Client Bridge

300Mbps(2.4GHz)

2x 5dBi Detachable Antennas

1x Shared 10/100 LAN/WAN Port

PoE 802.3af Complaint (12V/1A DC Supported)

NMS, Tx Power Controller, MSSID, 802.1x/WEP/WPA/WPA2, WMM, RSSI Indicator, SNMP, Private MIB, VPN Passthrough Supported

8 Modes Supported: AP/CB/CR/WDS AP/WDS CB/WDS Station/Router/Repeater

EnGenius ECB300 is a 300Mbps wireless-n multi-function AP/CB which offers unlimited coverage, strong penetration, secure network management and 802.3af PoE connection.

External 5dBi antenna provides extended and stable wireless connection. Maxima 29dBm high power transmission offers at least 3 floors penetration in your environment. MSSID + VLAN make your data more secure and easy management. Standard PoE interoperable with 802.3af makes internet connection more flexible.

EAP300 designed with 6 operation modes, users can set different mode in different environments. It is a multi-function  model suitable for the usages of SOHO, Small offices, restaurants and …etc.

Features

Software Features
System Requirement
System			Windows Windows7, 98, ME, NT, XP, 2000. Mac OS X (10.7)
Access method			Web Based (HTTP 1.0 / 1.1)
BrowserCompatibility			Microsoft IE 6.0 or above, Firefox 2.0 or above
Status
System Status			System Information		System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
			Current IP Setting		IP Address, Subnet Mask, Default Gateway, DHCP, DNS.
			Current Wireless Setting		Operation mode, Wireless Mode, Channel/ Frequency, L2 Isolation, MSSID Setting
Client List			List current associated clients. Show only authorized and associated clients
System Log			Displays a list of events triggered
Wireless Functional List
Operation mode				AP
				Router
				Client Bridge
				WDS AP
				WDS Bridge
				Universal Repeater
WDS detail				WDS AP algorithm
				WDS bridge algorithm
802.11 mode options				b/g/n
Channel setting				Manual
				Auto / Best Channel Selection
Transfer rate setting				Auto and Manual
Output Power Control				Select by dBm
Multiple BSSID (Multi AP)				4 BSSID for 2.4Ghz
				Each BSSID should has its own WiFi & security settings
Security		WEP		WEP(64/128bit)
		WPA/ WPA2		TKIP / AES
		Hidden ESSID
		MAC address filtering		MAC address filtering (WLAN, up to 32 field)
		L2 Isolation		Client isolation
		802.1x Authenticator		MD5/ TLS/ TTLS, PEAP (Nice to Have)
		802.1x Supplicant		Only CB/CR modes
LAN Settings				IP (check validity and DHCP server IP range)
DHCP server				DHCP Range, Lease Time, Client list
VLAN	MSSID			VLAN tag on MSSID
	Management VLAN Ethernet Port VID			Only allow user with specified VID to access the device
	Tag/ Untag Option			Independent VLAN setting can be enable or disable
	Add VLAN tag			Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
SNMP	SNMP V1/V2C			- SNMP Active : Disabled / Enabled - Read Community - Set Community - System Location  - System Contract - Trap Manager IP
	MIBI, MIBII
	Private MIB
Administration				User Name: admin
				Password: admin
Remote FW upgrade
Backup/ Restore Setting				Save Current Setting Restore Saved Setting Reset to Factory Default
Firmware Upgrade				Firmware Upgrade Allow User to decide to Keep current setting.
Diagnosis				Address to Ping

 

Spec.

Hardware Specifications
Memory	32MB
Flash	8MB
Diameter * Height	135(L) x 105 (W) x 30(H)
Physical Interface	LAN: 1 x 10/100 Fast Ethernet RJ-45 (802.3af PoE standard supported)
	Reset button
	Power Jack
LED Definition	Power x1		Green	Booting: Blink at 1HBooting System Ready: On Firmware Upgrade: Blink at 4Hz System Off: Power Off
	WLAN x1		Green	Link: Solid Light / Active: Blinking (Receiving/ Transmitting data)
	LAN x1		Green	Link: Solid Light / Active: Blinking (Receiving/ Transmitting data)
Adapter	12V / 1A
Wireless Specifications
Frequency Band	2.400～2.484 GHz(11b, 11g, 11n)
Modulation Technology	OFDM: BPSK, QPSK, 16-QAM, 64-QAM DBPSK, DQPSK, CCK
Operating Channels	11 for North America, 14 for Japan, 13 for Europe
Wireless Setting	Operation Mode – AP / Router/WDS AP/WDS Bridge/WDS Station/Client Bridge/Client Router/ Universal Repeater. Wireless Mode – 11b/ 11g /11n Channel Selection (Setting varies by Country) Channel Bandwidth (Auto, 20Mhz, 40Mhz) Transmission Rate (AP mode) - 11n only, 11b/g/n mix ,11b only ,11g only, 11b/g mix.
Receive Sensitivity (Typical)	2.412 ~ 2.472 GHz (11b) best ≦ -90 dBm 2.412 ~ 2.472 GHz (11g) best ≦ -88 dBm 2.412 ~ 2.472 GHz (11n) best ≦ -85 dBm
Available transmit power (The Max. Power may be different depending on local regulations)	11b	1Mbps - 11Mbps			29
	11g	6Mbps - 9Mbps			29
		12Mbps - 18Mbps			28
		24Mbps - 36Mbps			24
		48Mbps - 54Mbps			23
	11n	MCS 0-1 / 8-9			26
		MCS 2-3 / 10-11			25
		MCS 4-5 / 12-13			24
		MCS 6-7 / 14-15			23
Antenna	External 5dBi SMA antenna

Environment & Mechanical & Certification
Temperature Range	0 to 50° C - Operating,  -20 to 60 ° C - Storage
Humidity (non-condensing)	90% or less – Operating, 90% or less - Storage
Certification	FCC/CE/IC Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com