When set to Client Bridge mode, Ethernet-enabled devices such as printers and copiers can join a business’s existing wireless network when they are connected to the ECB1750’s Gigabit Ethernet port, making applications like printing from wireless laptops or tablets even easier. In WDS mode, the ECB1750 enables a company’s wireless network to be expanded without a wired connection between devices.
The ECB1750 also features Band Steering that shifts wireless traffic for Dual Band-capable clients to the 5 GHz band from the 2.4 GHz band, which helps to relieve network congestion and maintain optimal throughput speeds. The ECB1750’s Gigabit Ethernet port also offers greater bandwidth capacity and faster data transfers through the network. This means that bandwidth sensitive applications such as video and VoIP (Voice over IP) perform with improved quality and a minimum of packet loss.
Multiple ECB1750s can also be configured for Fast Roaming when used with a RADIUS server. This means that employees can be constantly connected to the network – whether they are warehouse workers scanning and capturing barcode information, employees on Wi-Fi phone calls while walking to meetings on another part of a building or healthcare professionals capturing patient information on mobile devices.
The ECB1750 supports wireless encryption standards such as Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) Encryption, IEEE 802.1X with RADIUS. MAC Address Filtering is also included allowing network administrators to allow or deny network access to client devices (computers, tablet PCs, NAS, smartphones, etc.) according to their MAC addresses. EnGenius’ EZ Controller™ Management Software for Windows, Mac OSX, and Linux (available as a free download) allows monitoring, management, and sequential firmware upgrades of EnGenius Access Points that have already been deployed in the network from the convenience of a desk.
The ECB1750’s external MIMO antenna array is comprised of three (3) detachable 5 dBi high gain antennas for the 2.4 GHz radio and three (3) detachable 5 dBi high-gain antennas for the 5 GHz radio. This combination of high transmit power, enhanced receive sensitivity, and six (6) high gain antennas results in long range connectivity to client devices and in some venues can minimize the number of Access Points necessary for a deployment.
3 STREAM 802.11ac WIRELESS SPEEDS ON 5 GHz
Up to 1300 Mbps on its 5 GHz for faster file transfers and smoother video streaming.
3 STREAM 802.11n WIRELESS SPEEDS ON 2.4 GHz
Up to 450 Mbps on its 2.4 GHz.
DUAL BAND OPERATION
2.4 GHz and 5 GHz frequency bands for expanded user capacity. Greater number of channels available on the 5 GHz frequency spectrum to support higher bandwidth applications like HD video streaming.
HIGH POWER AND LONG-RANGE COVERAGE
Up to 28 dBm transmit power enables the wireless signal to penetrate floors, ceilings, and walls for greater device connectivity. Features 3 detachable 5 dBi high gain Omni-directional antennas for 2.4 GHz and 3 detachable 5 dBi high gain Omni-directional antennas for 5 GHz.
SUPPORTS SEPARATE MODE CONFIGURATION PER FREQUENCY BAND
Choose one of three modes available to the ECB1750 depending on user needs: Access Point, Client Bridge, or WDS (AP, Station, & Bridge).
SIMPLIFIED MONITORING AND MANAGEMENT
For easier monitoring and maintenance after deployment, users can monitor the device remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux (available online as a free download).
BAND STEERING
Detects and allows Dual Band capable clients to shift to the 5 GHz band from the 2.4 GHz band, relieving network congestion and maintain optimal data traffic flow.
SSID-TO-VLAN TAGGING
Can be configured to broadcast up to eight (8) SSIDs per frequency band. Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
SIMPLIFIED AP MONITORING AND MANAGEMENT
For easier monitoring and maintenance after deployment on rooftops and other hard to reach places, users can monitor the Access Point remotely with SNMP-based EZ Controller wireless Access Point software for Windows, Mac OSX, and Linux (available online as a free download).
Technical Specification |
Wireless Radio Specification Dual Radio, 5GHz 802.11ac/a/n and 2.4GHz 802.11b/g/n -2.4GHz: Max 450Mbps -5GHz: Max 1300Mbps -Dual concurrent radio support Transmit Power (Maximum Value) -2.4GHz: Max 28dBm -5GHz: Max 28dBm -Maximum power is limited by regulatory power Supported radio technologies: -802.11b: Direct-sequence spread-spectrum(DSSS) -802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) -802.11n/ac: 3x3 MIMO with 3 streams -802.11ac with 20/40/80 MHz channel width -802.11n with 20/40 MHz channel width -802.11a/b/g with 20 MHz channel width Supported modulation types: -802.11b: BPSK, QPSK, CCK -802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM -802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Supported data rates (Mbps): -802.11b: 1, 2, 5.5, 11 -802.11a/g: 6, 9, 12, 18, 36, 48, 54 -802.11n: 6.5 to 450 (MCS0 to MCS23) -802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS=1 to 3) Power Power Source: -DC12V/2A -Active Ethernet, Power over Ethernet - 802.3at standard Antennas Six Detachable High Gain Omni-Antennas -Three detachable 5dBi 2.4GHz antennas -Three detachable 5dBi 5GHz antennas Compliant with SMA-type connector Interface 10/100/1000 BASE-T Ethernet Port: -Compliant with 802.3at PoE input |
Software / Management |
Operation Mode
Access Point / Client Bridge / WDS:
-A variety of operation modes to serve multiple constituencies and applications.
Wireless
Auto Channel Selection
Up to 16 SSIDs
VLAN Tag
VLAN Pass-through
SNMP v1/v2c/v3 &MIB
Clients Traffic Status
Guest Network
QoS complaint with IEEE 802.11e standard
RADIUS Accounting
Band Steering
IEEE 802.11i and 802.11r Fast Roaming
Fast handover
Multicast to Unicast Supported
Easy to Management
EnGenius Zone Controller (EZ Controller) Support
Save Configuration as Default
E-mail Alert
CLI Comments Support
Supported radio technologies
Wi-fi Scheduler
Reinforcement Security
WEP Encryption-64/128 bit
WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES)
Hide SSID in beacons
MAC address filtering
-Filter up to 32 MACs per SSID
Wireless STA (Client) connection list
Https
SSH
RF Specification (Aggregated Value)
Channel | Data Rate | Transmit Power (Aggregated, dBm) | Receive Sensitivity (Aggregated, dBm) |
802.11b 2.4 GHz | 1 Mbps | 28.0 | -96.0 |
2 Mbps | 28.0 | -95.0 | |
5.5 Mbps | 28.0 | -95.0 | |
11 Mbps | 28.0 | -93.0 | |
802.11g 2.4 GHz | 6 Mbps | 28.0 | -92.0 |
54 Mbps | 25.0 | -76.0 | |
802.11a 5 GHz | 6 Mbps | 28.0 | -93.0 |
54 Mbps | 24.0 | -76.0 | |
802.11n HT20 2.4 GHz | MCS 0 / 8 / 16 | 28.0 | -91.0 |
MCS 7 / 15 / 23 | 24.0 | -72.0 | |
802.11n HT40 2.4 GHz | MCS 0 / 8 / 16 | 28.0 | -87.0 |
MCS 7 / 15 / 23 | 24.0 | -71.0 | |
802.11n HT20 5GHz | MCS 0 / 8 / 16 | 27.0 | -92.0 |
MCS 7 / 15 / 23 | 24.0 | -73.0 | |
802.11n HT40 5GHz | MCS 0 / 8 / 16 | 27.0 | -89.0 |
MCS 7 / 15 / 23 | 24.0 | -72.0 | |
802.11ac VHT20 5GHz | MCS0_1SS / 2SS/ 3SS | 27.0 | -92.0 |
MCS8_1SS / 2SS/ 3SS | 22.0 | -69.0 | |
802.11ac VHT40 5GHz | MCS0_1SS / 2SS/ 3SS | 27.0 | -89.0 |
MCS9_1SS / 2SS/ 3SS | 20.0 | -65.0 | |
802.11ac VHT80 5GHz | MCS0_1SS / 2SS/ 3SS | 27.0 | -86.0 |
MCS9_1SS / 2SS/ 3SS | 20.0 | -62.0 |
*Maximum performance of the hardware provided. Maximum transmit power is limited by local regulatory.
*The supported frequency band is restricted by local regulatory requirements.
*Transmit power is configured in 1.0dBm increments.
Environmental & Physical |
Dimensions / Weight -189mm (L) x 140mm (W) x 26mm (H) -406 g (Unit, without mounting kit and antennas) Operating: -Temperature: 0°C~50°C -Humidity: 0%～90% typical Storage: -Temperature: -20°C~60°C Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com |
No comments:
Post a Comment