ENH210 Wireless Outdoor Enterprise Client Bridge features 14dBi high gain antenna dual polarization with high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENH210 integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.
With integrated 14dBi dual-polarized antenna and high output power, it’s convenient to build up to 25km long range wireless link while reducing dead spots. Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications. ENH210 is designed to deliver reliable service under harsh outdoor environment with certified IP67 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps. Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.
Specification
High output power
Transmit high output power programmable for different country selections
High Data Rate
High speed transmitting rate up to 300Mbps with 2T2R 802.11n
Long range transmitting
Transmit power control and distance control (ACK timeout)
Signal Strength Display
RF signal strength status is shown by LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication
Multiple SSID
4 SSID supported. Each SSID can set itself wireless or WAN access setting
Networking
PPPoE
Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
802.11i & 802.1x WPA, WPA2 & IEEE802.1x Authenticator
Management
Firmware Upgrade
Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup
Reset to factory default. User can export all setting into a file via WEB
MAC Filter
Provide MAC address Filter function
Ping & Trace Route
Built-in PING function & Trace Route function in Web GUI
MIB
MIB I, MIB II(RFC1213), Private MIB
SNMP
V1, V2c
Specification
Hardware Specification
Memory
64MB
Flash
16MB
Physical Interface
1 x Gigabit Ethernet Port with PoE support
1 x Gigabit Ethernet Port
Power Requirements
- Active Ethernet (Power over Ethernet)
- 802.3af/at support
- Power Adapter 48V DC / 0.38A
RF Specification
Frequency Band
802.11b/g/n
Data rate
300 Mbps
Radio Frequency Band
(The Max. Power may be different depending on local regulations)
Channel
Data Rate
Tx Avg. Power
(±2dBm)
Rx Sensitivity
(±2dBm)
802.11b(2.412 ~ 2.472GHz)
1Mbps
29
-97
2Mbps
29
-95
5.5Mbps
29
-92
11Mbps
29
-89
802.11g(2.412 ~ 2.472GHz)
6Mbps
29
-96
9Mbps
29
-93
12Mbps
29
-89
18Mbps
29
-85
24Mbps
27
-81
36Mbps
27
-79
48Mbps
26
-76
54Mbps
25
-75
802.11n(2.412~ 2.472GHz)
(2 streams)
MCS0 / MCS8
29
-95
MCS1 / MCS9
29
-92
MCS2 / MCS10
29
-87
MCS3 / MCS11
29
-85
MCS4 / MCS12
26
-80
MCS5 / MCS13
25
-79
MCS6 / MCS14
24
-74
MCS7 / MCS15
23
-73
Antenna
Internal 14dBi Directional Antenna
Environment & Mechanical
Temperature Range
Operating -20°C~70°C
Storage -30°C to 80°C
Humidity (non-condensing)
0%～90% typical
Waterproof
IP67
Dimensions
323mm (L) x 230mm (W) x 107mm (H)
Weight
1568g
Fidem Technologies
Add : F-86/A, 4th Floor, Taz Apartment,
Abul Fazal Enclave Part-1, Okhla,
Jamia Nagar, New Delhi - 110025(India)
Mob No : +91-9911567618 / 9717317430
Email ID : Sales@fidemonline.com
website : www.fidemonline.com
No comments:
Post a Comment