EnGenisu ENS200
Engenius ENS200 is long range high-efficient access point and client bridge with 8dBi directional antenna which provides an optimum, extended real outdoor throughput performance specially for point to point transmission in long range distances. The ENS202 is IP65 certified device which can be a waterproof with compact, robust in design can be diversely configured and operated in the extremely harsh outdoor conditions. It can works in multi-operation modes (CB/CR/AP/WDS Bridge/WDS Station) integrated with Network Management Software “EZ Controller” which can offer variety uses in constructing scalable wireless network of all possible applications also allow centralized management via user-interface.
ENS200 built-as per industries standards (IEEE802.1x, WEP, WPA, WPA2, TKIP/AES for CB/CR modes) and ensure full-scale security protection and POE supports excellent for long-range network installation.
Features
Hardware Features | |
High output power | Transmit high output power programmable for different country selections |
High Data Rate | High speed transmitting rate up to 150Mbps with 1T1R 802.11n |
Long range transmitting | Transmit power control and distance control (ACK timeout) |
Signal Strength Display | Indicate RF signal strength to be shown as LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication |
PoE Support | Support proprietary 24V passive power over Ethernet |
Software Features | |
Multiple SSID | 4 SSID supported. Each SSID can set itself wireless or WAN access setting |
PPPoE | Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected |
PPTP | Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks |
VLAN Pass-through | Support VLAN Pass-through |
WiFi Scheduling | User could set a schedule for turning-on/off WiFi Radio |
Firmware Upgrade | Upgrading firmware via web browser, setting are reserved after upgrade |
Reset & Backup | Reset to factory default. User can export all setting into a file via WEB |
Ping & Trace Route | Built-in PING function & Trace Route function in Web GUI |
MIB | MIB I, MIB II(RFC1213), Private MIB |
SNMP | V1, V2c, V3 |
Specifications
Specifications | ||||
Standard | IEEE 802.11 b/g/n | |||
Memory | 32MB | |||
Flash | 8MB | |||
Physical Interface | 2 x RJ-45 for 10/100 Fast Ethernet 1 x Reset Button | |||
Power Requirements | - Active Ethernet (Power over Ethernet) - Proprietary PoE design - Power Adapter 24V / 1A | |||
RF Specification | ||||
Frequency Band | 802.11b/g/n | |||
Data rate | 300 Mbps | |||
RADIO FREQUENCY BAND (The Max. Power may be different depending on local regulations) | Channel | Data Rate | Tx Avg. Power (±2dBm) | Rx Sensitivity (±2dBm) |
802.11b(2.412 ~ 2.472GHz) | 1Mbps | 28 | -97 | |
2Mbps | 28 | -95 | ||
5.5Mbps | 28 | -92 | ||
11Mbps | 28 | -89 | ||
802.11g(2.412 ~ 2.472GHz) | 6Mbps | 28 | -96 | |
9Mbps | 28 | -93 | ||
12Mbps | 28 | -89 | ||
18Mbps | 28 | -85 | ||
24Mbps | 27 | -81 | ||
36Mbps | 26 | -79 | ||
48Mbps | 25 | -76 | ||
54Mbps | 24 | -75 | ||
802.11n(2.412 ~ 2.472GHz) | MCS0 / MCS8 | 29 | -95 | |
MCS1 / MCS9 | 29 | -92 | ||
MCS2 / MCS10 | 29 | -87 | ||
MCS3 / MCS11 | 29 | -85 | ||
MCS4 / MCS12 | 26 | -80 | ||
MCS5 / MCS13 | 25 | -79 | ||
MCS6 / MCS14 | 24 | -74 | ||
MCS7 / MCS15 | 23 | -73 | ||
Antenna | Internal 8dBi Directional Antenna | |||
Environment & Mechanical | ||||
Temperature Range | Operating -20°C~70°C Storage -30°C to 80°C | |||
Humidity (non-condensing) | 0%～90% typical | |||
Waterproof | IP55 | |||
Dimensions | 260mm (L) x 84mm (W) x 55mm (H) | |||
Weight | 380g Wireless Access Point, Client Bridge, engenius, ENS200, Engenius ENS200, Wiress, Wif, Wireless Solutions Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com | |||
No comments:
Post a Comment