EnGenius ENH500 Wireless Outdoor Client Bridge

EnGenius ENH500 Wireless Outdoor Client Bridge

ENH500 Wireless Outdoor CPE features 13dBi high gain antenna dual polarization with high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. ENH500 integrates 4 operation modes: Access Point, Client Bridge, Client Router and WDS.

With integrated 13dBi dual-polarized antenna, it’s convenient to build up to 25km long range wireless link while reducing dead spots. Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications. ENH500 is designed to deliver reliable service under harsh outdoor environment with certified IP55 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps.  Most importantly, it is built-in encryption standards (WEP, WPA, WPA2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.

Specification

High output power

Transmit high output power programmable for different country selections

High Data Rate

High speed transmitting rate up to 300Mbps with 2T2R 802.11n

Long range transmitting

Transmit power control and distance control (ACK timeout)

Signal Strength Display

RF signal strength status shown LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication

Multiple SSID

4 SSID supported. Each SSID can set itself wireless or WAN access setting

Networking

Narrow Bandwidth

Provide different bandwidth selection (5MHz/10MHz/20MHz/40MHz) for wireless communication

PPPoE

Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

802.11i & 802.1x

WPA, WPA2 & IEEE802.1x Authenticator

Management

Firmware Upgrade

Upgrading firmware via web browser, setting are reserved after upgrade

Reset & Backup

Reset to factory default. User can export all setting into a file via WEB

Ping & Trace Route

Built-in PING function & Trace Route function in Web GUI

MIB

MIB I, MIB II(RFC1213), Private MIB

SNMP

V1, V2c

Specifications
Standard	IEEE 802.11 a/n
Physical Interface	- 1 x 10/100 Fast Ethernet Port with PoE support - 1 x 10/100 Fast Ethernet Port - 1 x Reset Button
Data rate	300 Mbps
LEDs status	- Power Status - LAN1/LAN2 (10/100Mbps) - WLAN (Wireless is up) - 3 x Link Quality (Client Bridge mode)
Security	- WEP Encryption-64/128/152 bit - WPA/WPA2 Personal (WPA-PSK using TKIP or AES) - WPA/WPA2 Enterprise (WPA-EAP using TKIP) - 802.1x Authenticator - Hide SSID in beacons - MAC address filtering, up to 50 field - Wireless STA (Client) connected list
Power Requirements	- Active Ethernet (Power over Ethernet) - Proprietary PoE design - Power Adapter 24V DC / 1A
Antenna	Internal Directional 13dBi with dual polarization
Package Contents	- Wireless Long Range 11N CB/AP(ENH500) - PoE Injector (EPE-24R) - Power Adaptor - CD with User’s Manual - QIG - Mounting Set - Special screw set
Certifications	FCC, CE, IC
RADIO FREQUENCY BAND (The Max. Power may be different depending on local regulations)		Channel	Tx Avg. Power Optimal (dBm)	Rx Sensitivity Optimal (dBm)
	802.11a (5.18 ~ 5.825GHz)	6Mbps	27	-95
		9Mbps	27	-92
		12Mbps	27	-89
		18Mbps	27	-85
		24Mbps	27	-81
		36Mbps	26	-79
		48Mbps	24	-76
		54Mbps	23	-75
	802.11n(5.18 ~ 5.825GHz)	MCS0 / MCS8	27	-94
		MCS1 / MCS9	27	-92
		MCS2 / MCS10	26	-88
		MCS3 / MCS11	26	-85
		MCS4 / MCS12	25	-80
		MCS5 / MCS13	24	-79
		MCS6 / MCS14	24	-74
		MCS7 / MCS15	23	-73
ENVIRONMENT & MECHANICAL
Temperature Range	Operating  -20°C ~ 70°C Storage  -30°C ~ 80°C
Humidity (non-condensing)	0%～90 % typical
Waterproof	IP55 Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com