EnGenius ENS202EXT Wireless Outdoor Access Point

EnGenius ENS202EXT Wireless Outdoor Access Point

ENS202EXT High-Powered, Long-Range 2.4 GHz Wireless N300 Outdoor Access Point

ENS202EXT Wireless Outdoor unit provides not only external antenna connectors for antenna upgrade, but also high output power and high sensitivity can extend the transmission range to deliver a stable wireless connection. Besides the current operating modes on the Access Point, Client Bridge, Client Router and WDS Modes, EnGenius configured the repeater mode and the AP function under the CR mode for achieving the coverage, reducing the maintenance fee and flexible application for the customers’ need.

Advanced multi-function operation modes offer flexibility in constructing scalable wireless networks for all possible applications. ENS202EXT is designed to deliver reliable service under harsh outdoor environment with certified IP55 protection and tailored to accommodate multimedia streaming services with data-rate up to 300Mbps.  Most importantly, it is built-in encryption standards (WEP, WPA, WP

A2, TKIP/AES and IEEE802.1x) ensure maximum security and compatibility.

Hardware Features
High output power	Transmit high output power programmable for different country selections
High Data Rate	High speed transmitting rate up to 300Mbps with 2T2R 802.11n
Long range transmitting	Transmit power control and distance control (ACK timeout)
Signal Strength Display	Indicate RF signal strength to be shown as LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication
PoE Support	Support proprietary 24V passive power over Ethernet

Software Features
Multiple SSID	4 SSID supported. Each SSID can set itself wireless or WAN access setting
PPPoE	Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected
PPTP	Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks
VLAN Pass-through	Support VLAN Pass-through
Firmware Upgrade	Upgrading firmware via web browser, setting are reserved after upgrade
Reset & Backup	Reset to factory default. User can export all setting into a file via WEB
Ping & Trace Route	Built-in PING function & Trace Route function in Web GUI
MIB	MIB I, MIB II(RFC1213), Private MIB
SNMP	V1, V2c, V3

Hardware Specification
Physical Interface	2 x RJ-45 for 10/100 Fast Ethernet 1 x Reset Button
Power Requirements	- Active Ethernet (Power over Ethernet) - Proprietary PoE design - Power Adapter 24V / 0.6A

RF Specification
Frequency Band	802.11b/g/n
Data rate	300 Mbps
Radio Frequency Band (The Max. Power may be different depending on local regulations)	Channel  Data Rate Tx Avg. Power (±2dBm) Rx Sensitivity (±2dBm) 802.11b(2.412 ~ 2.472GHz)  1Mbps 26 -95 2Mbps  26 -95 5.5Mbps  26 -93 11Mbps  26 -93 802.11g(2.412 ~ 2.472GHz)  6Mbps 26 -95 9Mbps  26 -93 12Mbps  26 -93 18Mbps  26 -93 24Mbps  26 -92 36Mbps  25 -80 48Mbps  24 -77 54Mbps  23 -75 802.11n(2.412 ~ 2.472GHz)  MCS0 / MCS8 26 -95 MCS1 / MCS9  26 -93 MCS2 / MCS10  26 -92 MCS3 / MCS11  26 -90 MCS4 / MCS12  25 -86 MCS5 / MCS13  24 -83 MCS6 / MCS14  23 -76 MCS7 / MCS15  22 -73
Antenna	2 x External SMA Connector

Environment & Mechanical
Temperature Range	Operating -20°C~70°C Storage -30°C to 80°C
Humidity (non-condensing)	0%～90% typical
Dimensions	186mm (L) x 100mm (W) x 29mm (H)
Weight	300g Fidem Technologies Add : F-86/A, 4th Floor, Taz Apartment, Abul Fazal Enclave Part-1, Okhla, Jamia Nagar, New Delhi - 110025(India) Mob No : +91-9911567618 / 9717317430 Email ID : Sales@fidemonline.com website : www.fidemonline.com